Blog Options

How to Avoid Damp in the Home - Part 2

How to Avoid Damp in the Home - Part 2

Your home is your castle and with a Home Depot Money  Saving Coupon from We Are Coupons looking after your castle costs less. Condensation is an unpleasant and unsightly problem that can cause damp patches and mould growth. It can also cause wooden window frames to rot and is harmful to your health.



Wipe down any cold surfaces

Wiping down your shower tiles or windows is a great way to remove any moisture that may have built up and it's also an effective way of keeping your home germ-free. The best part about this trick is that it's easy to do, as long as you have the proper equipment on hand.


Using the right sponge and some soapy water, you can get rid of all that excess moisture quickly and safely. The best part is that your bathroom will look and feel much fresher as a result.


Condensation is caused by airborne moisture, the microscopic drops of liquid that form when warm, moist air comes in contact with cold surfaces like a glass window or ceiling. The best way to avoid condensation is to keep your house as well ventilated as possible.


This will prevent the humid air from coming into contact with colder surfaces and it's a good idea to open the windows occasionally while you're at it.


It's also a good idea to consider ways to improve your home's energy efficiency and reduce your carbon footprint. A few simple changes, such as insulating your roof and windows, can make a big difference in the long run.


In the end, a few small changes can have a huge impact on your household's comfort and the longevity of your possessions. The right technology and equipment will ensure that you can enjoy the luxury of a cozy home for years to come.


Increase your heating

If condensation is an issue for you, there are a few things that can be done to help avoid it. Increase your heating, ensure there are enough ventilation points in your home and wipe down cold surfaces regularly to reduce the amount of moisture produced.


The main cause of condensation is the difference in temperature between the interior air and the outside air. This can occur when windows are not properly sealed or are surrounded by curtains, heavy window coverings or insulation.


It’s important to remember that condensation is most likely to happen in winter as the internal and external temperatures are both lower than in summer. However, this is not the only time that it can be an issue.


A few other factors can also lead to condensation problems, such as new builds or if there is a sudden temperature change.


Firstly, try to keep your windows open as much as possible during the day to allow fresh air into the house. This will not only help prevent condensation, but it will also help to improve the overall air quality of your home.


Finally, make sure that the heat from your boiler is evenly distributed throughout your home to ensure that each room stays at a comfortable temperature. This will help to avoid condensation as the warm air will be able to stay in the rooms longer before it is cooled by the cooler exterior air.


This is particularly useful if you are planning to leave your home for an extended period of time as it will keep the temperatures in your property at a more comfortable level. It’s also a good idea to set the heating to come on at regular intervals throughout the day so that the temperature in each room isn’t too far away from the average outdoor temperatures.


Another way to ensure that the temperature of your home isn’t too low is to install an extractor fan in your kitchen and bathroom. These fans help to remove excess moisture from the air that is being produced by cooking, washing and drying. This means that condensation is less likely to form in these rooms and can help to reduce the risk of mould forming on walls and other surfaces around your home.

Leave your comment